Questions About Coolers

To buy the right water cooler, you need to evaluate your needs. The number of people who will use it, the environment in which it will be placed, as well as whether the area you are in has drinking water or is unsuitable.

OASIS has prepared for you the ultimate water cooler purchase guide to make the best choice based on your needs.

For any additional information, clarification or assistance, do not hesitate to call us at 210 6000 621. We will be happy to serve you.

Find here the proper maintenance of the water cooler seeing all the steps and what exactly you should pay attention to.

In this article you will see one by one the steps for the proper cleaning of your cooler, ensuring proper hygiene and the longest possible life.

For any information, clarification or assistance, do not hesitate to call us at 210 6000 621. We will be happy to serve you.

Water coolers for free - for rent is the perfect choice if you have a lot of consumption, mainly due to the economy and service they offer you.

You can opt for free bottled water coolers, or with a fixed small monthly dose and unlimited use of tap water or even a free mains cooler with filters. The choice is yours!

See here all the available options and for any additional information, clarification or help, do not hesitate to call us at 210 6000 621. We will be happy to serve you.

The characteristics that a water dispenser must have, in order to meet basic safety and hygiene requirements, are:

1. Have stainless steel water tanks
2. Have a freon compressor for adequate water cooling
3. Can accept all large water bottles for coolers 10, 12, 19 and 20 liters
4. Have overvoltage protection (short circuit protection)
5. To have international approvals, mainly CE
6. To have a representative in Greece who provides you with a two-year warranty, so that you are covered in a future problem (spare parts or service)

Oasis can and does cover you in all of the above.

In case you go on vacation or are absent for a long time, the procedure to do in the water cooler is as follows:

1. Turn off the switches on the back of the cooler and unplug it.

2. Depending on your cooler, follow the corresponding actions.

- If you have a water cooler with a bottled bottle: Empty and remove the bottle and leave open the cooler valve that closes with the bottle

- If you have a tap water cooler with a filter bottle: Empty the whole bottle again and leave it out of the cooler and open, so that it does not retain moisture

- If you have a mains water cooler with filters and connection to the supply: Turn off the water supply and remove the cooler valve

3. Drain any remaining water left by the cooler from all taps and from the plug located low on the back of the cooler.

The main cause of water leakage in a cooler that has a bottle with a filter, is due to the poor operation of the float, which is located at the bottom of the bottle.

Some practical tips:

• make sure the bottle float is properly installed.
  
• Put the narrow side of the nut down, the round silicone on the outside of the bottle and screw all the parts of the float well
• the float must be free of salts or any dirt. Especially its internal silicone
• do not fill the bottle over the wreath
• do not shake the cooler when it has water

For any help or information, call us at 210.6000.621

The process of changing the tap in a water cooler takes just 3 minutes, following the steps below:

1. Turn off the water cooler switches and unplug it.

2. Press the blue faucet on the cooler until no water comes out.

3. Unscrew the switch intended for replacement.

(Note: You can change any faucet you want, either red or blue, without running water, regardless of whether you have drained the cooler water only from the blue faucet.)

4. If necessary, change the sealing gasket located on the thread that screws the faucet.

5. Screw on the new faucet, taking care not to get it wrong.

6, Plug in the switches and turn on the switches one by one.

* In most commercial water coolers, the faucet changes in the above way.

> For any additional information, clarification or assistance, do not hesitate to call us at 210 6000 621. We will be happy to serve you.

Coolant faucet leakage can occur due to various causes:

1) The faucet may be broken and need to be replaced.

2) The cooler may have collected salts or dirt and for this reason the mechanism in the faucet does not seal properly, resulting in leakage. In this case, you should clean the cooler.

3) There is the case that after cleaning the cooler, even though it is clean, the faucet still drips. In this case, something may have entered the faucet mechanism, causing non-sealing.

If you do not find a solution, please do not hesitate to contact us for technical support. You can contact us by phone (landline at 2106000621 and via Viber at 6986966989), email or through the contact form on our website.

If your coole does not cool after maintenance, check the green power switch on the back of the chiller to see if it is on.

If you can't find a solution, call us at 210 6000 621.

Key Note:

If the cooler has been inactive for a long time, e.g. during the Winter period and there was a small freon leak in the cooling system, it is possible that the freon may have drained during this time.

Freon leakage can cause insufficient or even total loss of cooling.

* To clarify that the work for the maintenance of the cold and hot water tanks does not affect the closed cooling circuit.

If you notice a leak in your water cooler, it might be due to one of the following:

Bottle-fed cooler:
➤ Try replacing the water bottle.

Cooler with filter bottle:
➤ Lift and reposition the bottle — the float inside might be stuck.
➤ Make sure the bottle is placed correctly.

Plumbed-in cooler (connected to water supply):
➤ Check if there is a pressure reducer installed.
➤ First, drain all the water from the cold tap and open the valve to check if the tank has water or if the float is stuck.

Is the cooler not lighting up?

Here's what you can do:

1.  Try plugging the cooler into a different outlet.
2.  Change the cooler fuse.
3.  Press the reset button, if applicable.

For more details or assistance, call us. 📞